Sunday, May 2, 2021

Palacio de Pollo (Chicken Palace)

 First stage in creating a new chicken run

I have built the new chicken run.  That was the big part.  Next I will design a new coop that attaches to the outside of the run, and sits between the run and the shed.  Once that is done, I can remove the old coop that is currently sitting inside the run.

Better weather protection for the birds, less noise for the neighbors, and it provides additional privacy for the fire pit.   (the trash cans are actually feed and scratch grains  for the girls)

this is what we started with
- functional, but looks pretty rough



building a frame around existing run




Rafters going on




Roof on

Shed and run

Fire pit view of shed and chicken run


Sunday, April 11, 2021

Power vent for the workshop (garage)

 I use lacquer and oil based paint in the workshop occasionally.  The 'workshop' is actually my 2 car garage.  It is very stinky and gives off noxious fumes.  Using the welder, even a little bit also makes some fumes; and wood working also creates a bit of dust.  Opening the garage door is not very practical in the middle of winter.  

I was looking for a way to vent the garage.   I took out an unused window and installed a 12" power vent.  I connected it with an extension cord with a timer.  

Works Great!

... and no, I don't make sawdust, use oil based paint and weld all at the same time . . .  that would end very badly!

Friday, April 9, 2021

Rain Water Collection Tank for the Garden

 We put a 275 gallon, food grade IBC tote next tot eh she.  I ran the downspout from the shed into the tank.  After running a hose from that, we now have 'free' water for the garden.





I will make a metal bracket later when I have more time.



 




Tuesday, April 6, 2021

Shutters on the house

Here are some new Shutters

                                                      None

                                            

                                                      White


                                                      Hickory

Now we need to replace the storm door, paint the railing and determine what color to paint the trim.  


Monday, March 8, 2021

Ring Box

 One of my co-workers recently got married - and they needed a ring box.  Fun project to make!  

Ring Security detail.

Wednesday, February 10, 2021

Painted Brick Fireplace

 We decided that we were tired of looking at the 1969 style brick fireplace in the middle of our house.  As long as I am going to put some effort into painting it, I might as well take care of that stoooooopid lip on the left side that does nothing but collect dust.   Got out the angle grinder with masonry bit, shop vac and went work....  (also used the respirator, goggles and ear muffs - that was a mess.)  I also had a scrap from the carpet install, and was able to patch the missing piece just fine.


I did open the sliding door and put the 24" shop fan on high to blow out the dust.  

Now, time to replace that carpeting......



Tuesday, December 22, 2020

'Go Live' test of new Tray

 Full field run test of new trays.

First test in the evening.


Next day in the afternoon.

Both trays performed quite well.  All refreshments delivered without incident.


Monday, December 14, 2020

Serving Trays

 As much time as we spend out at the firepit, I realized it would be nice to have a serving tray or two to help carry refreshments.   So I made a few.  Then I made a few more.

Oak and Mahogany on the left.
Hickory and Walnut on the right.

 Actually, the longer the quarantine drags on, the more we realize we would rather hang out at home around the fire pit anyway.  We are fully embracing the hermitage life style of the old school monks, hermits and other general anti-social types.  Even the most secluded recluse still needs the ability to properly carry two beverages, and a small snack to the fire pit seating area safety without spilling.  These trays are perfect for that task. 

Sunday, December 6, 2020

Wooden Spoons

We saw on Pintrest where folks use a wood burning kit to decorate wooden spoons.  That looked like a great gift idea, but I also decided to make the wooden spoons.  Most of the spoons we see in the store are pretty flimsy so I decided to use some hickory and make some spoons that could really hold up to stirring up a big double batch of snickerdoodles.

Cutting out rough shape from 5/4 hickory plank
Turn handle on lathe


Use Drill press w Forstner bit and
then Dremel to hollow out bowl

use belt sander for outside shaping


stencil pattern and wood burn
A coat of 'spoon butter' provides a food safe finish
and really makes the wood 'pop'!

(Spoon Butter = Bees wax and Mineral oil)





 

Tuesday, October 13, 2020

Welder Cart Upgrade !

 The Old Raven Workshop has upgraded the Welder.

The old Old Easy MIG100 was a great little welder.  However it has moved onto a new home....


Old EasyMIG100 and 12" x 24" table top
New Klutch 140i Welder and bigger
18" x 24" table top (5/16 thick)
Welding Cart / Table








The new Klutch Mig140i seems to be a nice up grade!  To go with the new welder, I put together a new Welding cart/table.   Most people have a welding cart to hold the welder, and a separate table for welding.  What I find most useful is a smaller, more convenient table to weld on that also stores the welder below.  Much more convenient for a smaller shop.  Eventually I hope to add a small argon bottle to the set up, to go with full gas MIG (flux welding is messy) - there is enough space in the back of the cart to add a bottle.